Manufacturers
Shop by Brand

Categories
Newsletter
* E-mail Address:
* Name:

Black Eagle CARNIVORE Shaft .003 | 12 Qty

Black Eagle CARNIVORE Shaft .003 | 12 Qty
Brand: Black Eagle Arrows
Product Code: Black Eagle CARNIVORE Shaft .003 | 12 Qty
Availability: In Stock
Price: $149.00
Available Options

* BEA SPINE | STRAIGHTNESS:

* ARROW CUTTING | Nock Throat-to-Cut Measurement:

 
 CUTTING IS INCLUDED IN THE LISTED PRICE. 
 BE SURE TO ENTER YOUR REQUIRED CUT LENGTH  (Nock Throat to Cut) IN THE ENTRY FIELD ABOVE. 

 IF THIS FIELD IS LEFT BLANK, YOUR ARROW SHAFTS WILL BE SUPPLIED AT FULL LENGTH. 

 

Carnivore Shafts .003 Straightness - Dozen

 
This all purpose hunting/3-D shafts were designed by experienced, professional shooters to optimize speed, kinetic energy, and penetration.
 
With spine-to-weight ratios and superior tolerances that experienced bow hunters look for this shaft is proven to perform at all levels.
The "Carnivore" has exceptional durability and is sure bring home the trophy in the woods or on the 3-d course.
 
Carnivore SHAFTS come with: 
  • Bohning Standard nock - 11 Grains.
  • Zombie Slayer/ Carnivore aluminium Inserts - 14 Grains.
 
Specifications: 
 
•Straightness: ± 0.003" max.
 
 
Black Eagle measure shaft straightness over the full length of the shaft - up to 32".
This grading method produces shaft batches with greater straightness tolerances than most competitor's shafts.

•Weight tolerance: ± .5 grains 

 

Spine Inner Diameter Outer Diameter GPI
250 .2445" .303" 9.7
300 .2445" .296" 8.5
350 .2445" .291" 7.5
400 .2445" .287" 6.8
500 (30-50 UL)* .2445" .281" 5.9
 

 

Check which shaft/ arrow spine suitable for your set-up, please click this link: Black Eagle Selection Guide

*The 30-50 Ultra-lightweight shaft is designed to be shot from bows with a draw weight between 30-50lb. Do not exceed 50lb draw weight limit as it may damage the shaft and cause serious injury to you or others around you. Always inspect each shaft before each shot. Do not shoot damaged shafts.
 
Optional components are available for the Zombie Slayer Shaft and are sold separately:
  • G/F Nock Bushing - Red.
  • Pin Nock Bushing - 70/75 T-6 aluminum.
  • S/Steel Zombie Slayer Break-Off Point.
  • Full Brass Insert - 42 Grain.
  • Saunders 5/16" diameter Combo or Bullet Point.

Black Eagle Carnivore, Outlaw and Zombie Slayer components are all interchangable.

Gold Tip and Easton .246 components will not fit Black Eagle .2445 ID shafts, with the exception being the Easton G-Nock Uni-Bushing, that will fit.

 

 

 CUTTING IS INCLUDED IN THE LISTED PRICE. 
 BE SURE TO ENTER YOUR REQUIRED CUT LENGTH  (Nock Throat to Cut) IN THE ENTRY FIELD ABOVE. 

 IF THIS FIELD IS LEFT BLANK, YOUR ARROW SHAFTS WILL BE SUPPLIED AT FULL LENGTH. 

 
 
image

 

 

Made by Black Eagle Arrows, LLC.

Please read the Black Eagle safety information page regarding using and cutting carbon shafts.

Written text and photography produced by Ten Zone Archery is Copyright protected and may not be used for commercial purposes without written permission from Ten Zone Archery.